King Cobra trigger pull

[myhardtop]

I own 2 Colt King Cobras in 4" barrels. When pulling the trigger on one, it is just like butter. The second one is much stiffer. Changed to a shorter spring and no difference. Any idea's or suggestions to make the trigger pull less stiff? Thanks for all suggestions.

[A1A]

Check the hand channel in the sideplate. It may be rough and could benefit from some smoothing, but only smoothing as too much can cause malfunction. Here is one previous thread. King Cobra trigger pull

[myhardtop]

Check the hand channel in the sideplate. It may be rough and could benefit from some smoothing, but only smoothing as too much can cause malfunction. Here is one previous thread. King Cobra trigger pull

Thank you for the thread information. I just ordered the spring combination kit from Wolf's springs. Hopefully that will do the trick.