After 50 years, I have reluctantly had to close down my families gunshop since the passing of my father and am helping my mother in selling off materials.

I am in the process of sorting out boxes of parts and have the following supply of USGI / WWII Vintage / OEM Colt factory new old stock parts for sale so far. Parts are new unless stated otherwise. I have relied on the Coolgunsite.Com for info on the vintage USGI parts as well as what I have checked into from other sources and of course what I learned from my father. Most if not all the USGI parts were acquired by my father from the AMU during the mid to late 60's through the early 80's while he shot competetively. The commercial parts were either purchased direct from Colt or removed from new or like new guns as he custom built pistols during that time as well. Other items were either purchased new or acquired one way or another. There are both new and used (mechanically correct, w/ possible wear) parts that will be stated as such during the listing.

I doing the best I can to supply the proper info, but please feel free to correct me if I make a mistake. To answer some questions now to save time, I do not have any slides or frames left, there may be a couple more barrels that I will list after I check them and I do not have any original wood grips left. Sorry. I have parts and accessories for other firearms as well reloading materials, so please feel free to ask. I will do the best I can, just bear with me.

I have a good amount of pre 70 / 70 series blue Colt commercial 1911A1 parts that I am still sorting through, along with a small mix of additional USGI parts and some 80 series parts as well. There are also some stainless and nickle parts as well as aftermarket parts and accessories. It is a lot to post so I am going to keep the list' short as I generate them. Please feel free to inquire and we can discuss your request', just give me a little time to get to each request.

Payment via money order / personal check / bank check / cash (your choice). Shipping via USPS is $5 flat. Larger parts orders shipping will be factored per order.

Please direct questions to: m4scout@gmail.com.

1911/A1 Parts O Frame Military & Commercial

Qty. 1 - Individual 1911 Cleaning Rod WWI Brass Un-Marked (Has Brass/Synthetic Bristle WWII Brush On It) Very Nice Shape - $35

Qty. 3 - Individual 1911A1 Cleaning Rods Post War? Steel Parkerized Marked "SWT 5564102" As New - $8 each

Qty. 2 - Individual 1911A1 Dis-Assembly Tools Mfg. by Stanley Coded "064149" Black Parkerized Like New - $8 each

Qty. 1 - Used OEM Colt 1927 1911A1 Milled Short Triggger Original Black/Blue Finish / Very Light Finish Wear / Very NIce Trigger - $75

Qty. 1 - Used WWII / Post 9/43 OEM US&S 1911A1 Stamped Trigger Du-Lite Blued Finish / 25% Conservative Finish Wear / Very Good Clean Trigger - $40

Qty. 1 - WWII OEM Post 9/43 / Yawmen Metal Products? 1911A1 Stamped Parkerized Trigger / Correct for Colt, Ithaca, Remington Rand - $50

Qty. 1 - Used WWII 1911A1 Checkered Slide Stop Removed from US&S Pistol Blue Finish / Light Pitting on Smooth Surfaces / Good Clean Part - $30

Qty. 1 - WWII Colt Type 4 Pre-1944 Style Wide / Short Checkered Spur Hammer, Parkerized Finish - $65

Qty. 2 - WWII Checkered Recoil Spring Plugs, Parkerized - $20 each

Qty. 1 - WWII Barrel Bushing, Parkerized Like New Take Off - $30

Qty. 3 - WWII Sears Non Blasted Parkerized Finish? - $15 each

Qty. 1 - WWII Magazine Catch Checkered Parkerized - $25

Qty. 1 - WWII Recoil Spring Guide Parkerized - $15

Qty. 1 WWII? Mainspring Housing, Parkerized / Has 8 Ribs per Late Remington Rand / Rectangular Drain Cut On Interior Face / Oval Relief On Bottom, but No Lanyard Loop or Provision for One / Any Help with This One? - $35

Qty. 1 - Keyes WWII Production Single Grip Panel Right Side "Star w/ # 26" Code " Dull" Brown Checkered / Has Some Cracks Visable On Inside Of Panel - $5

Qty. 1 - Keyes Korean War Production Single Grip Panel Left Side # 5564063 "Dull" Brown Checkered - $10

Qty. 1 - Keyes Korean War Production Single Grip Panel Right Side # 5564062 "Shiney" Brown Checkered - $10

Qty. 1 - OEM Pair Colt Post-WWII / Early 50's Vintage Commercial Brown Plastic "Colt Wood" Grips w/ Rampant Colt Logo - $30

Qty. 1 - OEM Colt Used .45acp Pre WWII Pinned Commercial Magazine Blue/Patina (Normal Finish Wear / Lazy Type Font / Used Not Abused) - $35

Qty. 1 - OEM Colt Used .38 Super Magazine Blue (Minor Finish Wear / Marked "COLT SUPER .38 AUTO" / Pre-70's Vintage) - $35

Qty. 2 - OEM Colt 1911A1 Pre-70 Series Mfgd. Firing Pins for Caliber 9MM & 38 Super Part # 2500716 - $25 each

Qty. 1 - OEM Colt 1911A1 Pre-70 Series Mfgd. Plunger Tube Blue Part # 50171 - $15

Qty. 2 - OEM Colt 1911A1 Pre-70 Series Mfgd. Plunger Assy. Complete Part # 50164 - $10 each

Qty. 4 - OEM Colt 1911A1 Pre-70 Series Mfgd. Blue Grip Screws Part # 50209 - $3 each

Qty. 1 - OEM Colt 1911A1 Pre-70 Series Gold Cup Machined Sear Assembly (Sear-Depressor Spring-Depresor) - $25

Qty. 11 - OEM Colt 1911A1 Late Style Machined Sears 70 Series Mfgd. Part #50177 - $18 each / 2 or more for $15 each

Qty. 2 - OEM Colt 1911A1 Early Style Machined Sears Pre-70 Series Mfgd. Part #50177 - $18 each / 2 or more for $15 each

Qty. 1- OEM Colt 1911A1 Late Style Sear Current MIM Mfgd. Part #50177 - $12

Qty. 11 - OEM Colt 1911A1 Early Style Machined Sears Pre-70 Series Mfgd. Pulled from Like New Factory Govt. Pistols Part #50177 - $10 each

Qty. 2 - OEM Colt 1911A1 Late Style Machined Sears 70 Series Mfgd. Pulled from Like New Factory Govt. Pistols Part #50177 - $10 each

Qty. 1 - OEM Colt 1911A1 Early Style Machined Sears Pre-70 Series Mfgd. Pulled from Like New Factory Govt. Pistols Hard Chromed Part #50177 - $10

Qty. 1 - OEM Colt 1911A1 Pre-70 Series and 70 Series Mfgd. Govt. & Commander Extractor .45 caliber Blue Part # 50184 - $25

Qty. 1 - OEM Colt 1911A1 Pre-70 Series Mfgd. Commander Mainspring Part # 50158-2 - $3

Qty. 1 - OEM Colt Factory 10mm Delta Elite Barrel Blue - $140

Qty. 1 - OEM Colt Used 10mm Delta Elite Barrel Blue w/ Link & Pin (Like New / Minor use / < Than 100rds.Through Bore / Hood Dimensions Increased for Slide Fitting) - $110

Qty. 1 - Used / 85% Condition Officers / Compact 3.5" 45acp Hard Chromed Finished Barrel / No Link or Pin - $45

Qty. 1 - Para Ordnance Factory 40 cal. Ramped Barrel Blue - $100

Qty. 1 - Used / Not Abused Aluminum Black Pistol Grip Scope Mount Marked "NPC" / Left Panel Checkered / Ejection Port Weaver Style Bridge Mount - $10

Qty. 1 - Clark Custom Aluminum Black Pistol Grip Scope Mount Kit - $40

Qty. 1 - Original Bo-Mar Fast Draw Rib for Colt Commander / In Original Tube w/ Paperwork - $85

Qty. 1 - Used Mechanically New Long Barrel w/ Link & Pin Marked " 45 AUTO NM 7794414 " on Chamber Top, "C" Inside of Square on Right Side of Lug & " M P" on Left Side of Lug / Barrel OAL of 7 1/8" / Bright Shiney Bore Gauged Between .443/.444 - $125