Colt Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
130 Posts
Discussion Starter · #1 ·
I bought a Frontier Six Shooter, 5 1/2", new in 2008. Were these Guns a limited production? Are they a second generation of the Frontier Six Shooter? What is increase in value, if any, over a typical SAA of the same age & excellant condition?
 

· Registered
Joined
·
3,886 Posts
Swamprat;I collect mostly 44/40's, If you'll go to the photos section to "sound off like you've got a pair" then click on pg.2 you'll find 5 of mine that What Would u Say posted for me.
Beautiful guns, Jim.
Here's another one of mine, 1st gen with faded etched FSS;



 

· Registered
Joined
·
2,358 Posts
I tried to purchase one when they were making the etched barrel this last time and was not able to find them anywhere. My dealer couldn't get one into the shop to save his life. Plenty of 45lc but none with the etching. Always wanted one in nickel 7.5".
 

· Registered
Joined
·
3,886 Posts
I tried to purchase one when they were making the etched barrel this last time and was not able to find them anywhere. My dealer couldn't get one into the shop to save his life. Plenty of 45lc but none with the etching. Always wanted one in nickel 7.5".
You mean...like this?....;)
 

· Registered
Joined
·
1,787 Posts
I tried to purchase one when they were making the etched barrel this last time and was not able to find them anywhere. My dealer couldn't get one into the shop to save his life. Plenty of 45lc but none with the etching. Always wanted one in nickel 7.5".

It's a waste of time practically to try & use a local yokel dealer getting a Colt nowadays. You have to use the "Big Boys" or the Internet it seems.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top