[BusaDave]

Another new Colt Python problem. This one could cause a catastrophic failure of the metal in a high stress area behind the head of the bullet (cartridge) exploding.

Here's an idea...shoot a few hundred high power magnum loads and see if the crack gets worse! Don't worry about injury. Colt can pay for any damage or injury you might experience. Heck, the new Pythons are better in all ways than the old ones.

Or you can send it back to Colt, like many other new Pythons, and wait for them to check it out and return it to you.

Or, you can get a refund for a damaged product and spend a few hundred more and get an old Python and not worry about MIM parts.

Or, sell it or return it and buy a (gasp!) S&W, whatever model, and not deal with Colts anymore.

Good luck deciding which course of action. Love my old Pythons!

Well this guy is a real hater. Going to put this "person" on ignore. Lot of ignorance in his posts.

 

[whig]

I was not serious. I hate that there seem to be so many people upset at problems with their new Pythons. The only answer I see over and over again is "Send it back to Colt."! I am not encouraged at all to purchase a new Python when there seem to be so many problems, some that might be dangerous! Do what you want. I'll stick with shooting my old Pythons which have never failed me in 45 years!

 

[mlin1911]

By continue using firearms that a user suspected potential life threatening issue and not report to manufacturer, it is an invitation for lawyers to push some liability to the consumer for not doing so. May look bad to a corporation, but one can potential loss life in the event of serious injury. Not a good idea.

Talk to Colt customer service and send it back for a checking is the right way to do.

 

[whig]

I agree fully. It just seems to be needing to happen all too frequently. If I was a Colt Rep, I would stop production and ramp up quality control to ferret out these problems better to maintain reputation. Every time someone has a problem and posts it on a forum, like here, Colt's rep drops. And just think of how many problems are not being recognized early enough or not reported to others on a forum. More than we realize. Plus, many, many of these new Pythons are bought to become safe queens and not shot, so these problems won't be found.

It's a quality control issue.

 

[SnidelyWhiplash]

That’s what emojis are for…to make it clear one is not being serious.

 

[Olle]

Why the commotion, when this could just as well (and IMO more likely) be a superficial scratch? Have a beer and calm down, folks. No need to cancel Colt yet.

 

[Archer1440]

There are a small number of people upset at the sales success and clear overall mechanical superiority of the new design. We can ignore their pathetic outrage, and wish them well.

 

[po18guy]

Why the commotion, when this could just as well (and IMO more likely) be a superficial scratch? Have a beer and calm down, folks. No need to cancel Colt yet.

 

[guy sajer]

"you are not serious are you?"

Suggesting that you give this a rest . Thanks

 

[Jimmy45acp]

Looks like just a scratch, to my eye, from your picture. Probably caused by a small speck of brass or unburned powder getting caught behind the cylinder at some point when closing it. It doesn't look deep enough to be a crack unless you're seeing evidence on the edge of your recoil shield. If you find something there more severe than a slight burr, ask Colt for a return authorization for them to inspect and repair if needed. Good Luck!

 

[tim_park_97]

thanks folks for your comments! Finally able to look at it under magnification (see pic). Still couldn't tell whether it's crack or just a scratch. The mark is almost invisible if not from a certain angle. It doesn't look deep though. I contacted colt and they suggested me send it back to do an assessment. What do you guys think, should I send it back?

 

[Jconstruc]

If Colt recommends sending it back then that would be the smart thing to do. All you lose is a little time.

 

[whig]

I agree. If you didn't and there were further issues at this defect, you would be kicking yourself. That's the safe thing to do on their dime. Keep us informed, please. Thanks!

 

[Snake Bit]

You are not serious are you ? How in the world Colt will pay for damages if the gun blows up with shrapnels turning your brain into custard ?

Someone has obviously flipped his wig.

 

[MarkInTx]

Magnified, it does look more like a gouge or scratch than a crack.
If Colt wants to evaluate it on their dime...smart money says to let them look at it.

 

[COKid]

Looks like a scratch to me, as you can see that it extends in a perfect matching line onto the firing pin bushing.

 

[BusaDave]

I agree. If you didn't and there were further issues at this defect, you would be kicking yourself. That's the safe thing to do on their dime. Keep us informed, please. Thanks!

Colt has never had a cracked frame on a 2020 Python sent to them for evaluation.

 

[m13link]

Colt has never had a cracked frame on a 2020 Python sent to them for evaluation.

Sir, I have no issues with buying a new Python. I have both a 6" and 4" blue old Python. I have had them for years and am very happy with them. I fully intend to buy a 3" new Python when and if I find one at a reasonable price. I have fired a new 4" Python an was pleased with it. I think the internet greatly magnifies any problems a manufacture has. But I am very curious to know how you know that Colt has never had a cracked frame? Do you work for Colt? I do not mean to start an argument, or disrespect you in any way. But I am curious.

 

[BusaDave]

Sir, I have no issues with buying a new Python. I have both a 6" and 4" blue old Python. I have had them for years and am very happy with them. I fully intend to buy a 3" new Python when and if I find one at a reasonable price. I have fired a new 4" Python an was pleased with it. I think the internet greatly magnifies any problems a manufacture has. But I am very curious to know how you know that Colt has never had a cracked frame? Do you work for Colt? I do not mean to start an argument, or disrespect you in any way. But I am curious.

I am not going to comment on that. I am sure you understand.

 

[Jimmy45acp]

Suck it up and take the time to send it back and let Colt have a look, especially since they offered to do so. These latest pics it looks like a scratch. Really no big deal, but you're seeing it in the flesh so be sure and let Colt use their gear and experienced eyes take a look at it. You'll be happier in the long run.