Colt Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
249 Posts
Either use a bore light to look down the barrel, or use your fingernail to look down the barrel to make sure it is clear. Also you might want to cut the patches in half or one quarter. This works for me. Just make sure it is unloaded before looking down the barrel. Sorry to say this, but I have seen a guy not make sure first. Good luck. Dennis
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top