Colt Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
10,007 Posts
This is the one with the little flip lever, right?

Hard to tell, without pictures and folks get them confused.

If so - put the piece on half-cock, then back off the screw a quarter turn or so, flip the lever, and pull the barrel forward.

Assemble in reverse order and remember to tighten the screw.

If it's the one with the circular boss on the left side - press the button and pull the cylinder pin.

Shoot nothing more powerful than CB Caps.
 
1 - 5 of 5 Posts
Top