Colt Forum banner

Colt Python Houge grip

3004 Views 9 Replies 8 Participants Last post by  Previs
How to install it? I cannot find a youtube video nor any real good directions on how to do this. The design is silly as it screws in the bottom with a shim type nut deal. I would appreciate any input on this...
1 - 1 of 10 Posts
I will give a bit of advice on the Hogue grips from my findings...Keep your gun clean! I have owned many Colt revolvers where some dirt got between the grip and the metal and when the gun is fired it creates a sanding action and the outline of the grip will embed itself into the metal. I'm sure this is the case with any grip but for some reason I never see any damage except for the Hogue. I guess the very top lip of the grip does not sit tight to the metal allowing some small particles to get behind.
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.