Colt Forum banner
1 - 1 of 1 Posts

31 Posts
Discussion Starter · #1 ·
Hello the forum

Since everyone has been very kind in providing me help and advice with my newbie questions, I decided to test the waters and ask another.

Before my 1978 Trooper Mk. III came to be mine, the previous owner had the barrel cut down to 4.25 inches. In doing this, the original front sight was gone and replaced with a blade-type sight that is pinned in place in a slot in the top of the barrel.

To make a long story short, I would like to restore the front sight to as close to the original as I can.

Any help in finding replacement front sights or advice on how to solve this problem would be greatly appreciated.

Much obliged.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.