Colt Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
:confused: I broke down my Combat Commander a while back and just recently put it back together again. Now when I go to load a round the shells are getting stuck mid load. The shells are getting stuck halfway up the ramp and the slide does not close. What should I look for? :confused:
 

·
Registered
Joined
·
1,714 Posts
first, try a different Mag and different ammo. I'm guessing its the mag, assuming you put the gun together right.
tom
 

·
Registered
Joined
·
287 Posts
Take a look at the rear of the round. Is it prevented from rising up because of interference with the extractor or firing pin?
 

·
Registered
Joined
·
7 Posts
If you took the magazine apart go back and make sure you put the magazine spring in the correct way. Also if you took the extractor out make sure that you did not leave a bunch of trash/carbon/gunk in the extractor hole.
29R
 
1 - 4 of 4 Posts
Top