Joined
·
21,356 Posts
The bottom 8 slides are Modified By the SMP by adding a special spring to keep the barrel
pushed into the extractor during recoil. This was to prevent a "stove pipe" issue the 380's had.
The top two slides were Modified By Colt by special request.
They do not have the spring detention screw nor do they cut into the slide markings that have
been raised higher on the slide. (the single top most slide in the picture should be ignored.)
ei8ht®
pushed into the extractor during recoil. This was to prevent a "stove pipe" issue the 380's had.
The top two slides were Modified By Colt by special request.
They do not have the spring detention screw nor do they cut into the slide markings that have
been raised higher on the slide. (the single top most slide in the picture should be ignored.)
ei8ht®