Colt Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Got a Colt Cobra with the stock grips. Serial # is: C878XX.

I want to put a Hogue grip I had on a DS that I foolishly got rid of a few years ago.
The DS I had was a post 72 weapon also.

The two studs at the rear of the gripframe are they pressed in. Or are they permanent as it appears they have to come out to make the grip go on and fit properly?
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #2 ·
GrandmasterB: The one on the right. I got them pressed out and a Hogue Kingwood grip fitted and secured to the frame. Looks real, real good and it points and shoots equally well.

Yes I would sell the DS factory grips, they are in good shape with all the varnish left on. $15.00 plus 3 dollars for Priority Mail.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top