Colt Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20 Posts
I have Hogue wrap-arounds on my Det.Sp. To remove the grip pin, I used my shop vise. I placed the open end of a 1/2" socket over the pin and tightened the vise until the pin was almost flush wirh the grip. Then I used a small pin punch to finish removing the pin. Hope this helps.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top