Colt Forum banner
1 - 1 of 1 Posts

·
The Searcher
Joined
·
11,095 Posts
The Agent and Cobra actions are different from the MkIII. When releasing the Agent or Cobra trigger, you might hear the sear flicking the hammer strut, the bolt tip resetting to the top of the rebound cam and the hammer rebounding. If you do not fully release the trigger, the action is not reset and ready to cycle again. That is operator error not gun malfunction. In the MkIII, you might hear the flick of the strut and the hammer tip returning past the bolt, which moves forward out of the way and snaps back. Even the MkIII requires the trigger to be released in order to cycle again properly. :)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top