Colt Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
12,832 Posts
Can you post some good, well lit, close up images of the Hand and it's Spring?

I am a little familiar with the Mechanism used on the subsequent DAs, but I am not familiar with that of the prior DA Swing-out-Cylinder ones on the .41 Frame.

I am sure the Spring can be replaced though, and that it is a matter of understanding how it is attached to the Hand.

I doubt it would have been Welded ( at least originally ).

Peened into a thin slot, maybe, but Welded, would not sound right for how things tended to be done then.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top