Colt Forum banner
1 - 1 of 26 Posts

· Registered
639 Posts
I like it, definitely not an abused example. Now, only one other part to check: Once the wedge is removed, pull the barrel off and remove the cylinder. The shaft that the cylinder is on is called the "arbor". Check to see if the portion of the serial number is stamped on the arbor. The way this revolver looks I'll bet it is there.

1 - 1 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.