Colt Forum banner
1 - 2 of 2 Posts

2,775 Posts
Discussion Starter · #1 ·
I got my Colt New Frontier out of the shop today, this the 7 1/2" .44 Special. When I got this gun the trigger was heavy for a gorrila to pull. I swapped out mainsprings, ordering a new one (a Colt replacement spring) from Brownell's and that improved the trigger some. Gave it to my gunsmith Keith Warner and he gave me a very crisp two pound pull. Also fit the ejector rod housing to snug up against the barrel. Colt would probably have corrected that, but since Keith had the gun for a trigger job he threw in the fitting of the ejector rod housing.

Now its a proper looking New Frontier with a very fine trigger.

Bob Wright
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.