Colt Forum banner
1 - 1 of 11 Posts

· *** ColtForum MVP ***
17,288 Posts
I don't see a problem.
It's not uncommon for most any revolver or automatic to have primer strikes off slightly.
None of those look too bad.

One thing you can do to give a little more information is to use a marker to put a mark on the edge of the base of the cartridges and load the cartridges with with mark positioned at 12:00 O'clock in each chamber.
That way when you open the cylinder you'll be able to tell in what direction the slightly off-center strikes are.

Still, I don't see anything to be concerned about.
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.