Colt Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
405 Posts
Discussion Starter #1
my new frontier shoots fine but the hammer pull is not smooth at all. you could say its 'choppy'. it has lighter hammer and trigger springs which helped but it hasnt felt right since i bought it used a couple of months ago. i have another colt that bob munden slicked up but i cant afford to send this one to be worked on right now. the serial number is 16xxxnf. any suggestions will be appreciated
 

·
Registered
Joined
·
48 Posts
only let qualified colt pistol smiths work on it..Bob certantlly has tuned quite a few... i let the best local smiths work on my saa 1926 and they created as many problems as they fixed.. these guns arnt tricky, but for some reason a lot of smiths think a quick job for a fast buck is what a 1500 dollar gun needs... a well known colt smith will be the only way i will have my guns worked on from now on.. good luck dave.
 
1 - 2 of 2 Posts
Top