Colt Forum banner
1 - 1 of 18 Posts

· Registered
Joined
·
2,465 Posts
There is nothing wrong with a gun that has character,even if it does have LOTS of character.Rebarreling takes a little more expertise than WECSOG could handle.You will need a lathe,a good dial indicator and turning or facing tools.The ability to shave a little off the end of the barrel to set cylinder gap once you get the sight to line up right by moving the barrel shoulder back,then the ability to recut the forcing cone.I may have left some small detail out but you get the idea.It might cause Wile E.'s head to 'splode.D*
 
1 - 1 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top