Colt Forum banner

Woodsman Safety -- again

777 views 1 reply 2 participants last post by  icdux1 
#1 ·
I poked around with the "safety catch" and noted that it works fine when the 'Mainspring" is not pressing on the 'hammer strut' and the 'hammer strut pin'.

My best guess is that the 'hammer strut pin is worn some and is letting the alignment hamper the safety catch from latching over the sear.

Now, where and who is a reliable smith to fix this gun?

Thanks Bob rjscroggs@aol.com
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top